Results 1 to 3 of 3
  1. #1
    Free Swimmer Nev's Avatar
    Join Date
    Aug 2011
    Posts
    420

    Led lighting for dummies

    So this was a question l asked in an earlier thread.
    I was sorta pointed in the right direction and after googling. and asking people who are way smarter than me, this is what I've come up with.

    Led lighting is pretty basic.
    Ability to solder helps but isn't hard to learn.
    Ebay is your friend.

    Ok so were to start?
    Leds - cree 3w are the best but cost aprox $5 each and generate lots ogf heat so require heatsinks and cooling fans.
    Cheap Chinese ones from ebay cost about $1.60 and don't generate any where near as much heat. So for us dummies that's the go.

    Led driver - you need one of these. leds require a constant current. among the specs of the led will be something like 700mA. Your driver must match that. Cost is $10 - 20 depending on size. Wherever on ebay you purchase your leds from will also sell drivers. Just buy one at same time. They are usually described as 3 x 3w driver or 10 -18 x 3w driver. Do not use downright drivers as these are constant voltage and will blow your leds.

    Wiring them up.

    Basically you just go + to - as per pic.

    Something to attach them to - aluminium channel is good. 80 x 40 costs about $7

    some pics of start and end result and I'll do a part 2 later on how to attach the buggers.











    [/code]

  2. #2
    Free Swimmer
    Join Date
    Jun 2010
    Location
    Melbourne, SE Suburbs
    Posts
    446
    Will be watching with great interest Nev. As much as I admire Swampy's work, those LED bitumen-melters Swampy has constructed are too high-end for my current interests, but something more conservative is ceratinly a gerat project for those cold winter days.

    Cheers,
    Scott

  3. #3
    Moderator
    Join Date
    Jan 2007
    Location
    Penrith NSW
    Posts
    5,873
    not bad!
    just remember within the cree LEDs you've got XR-E, XP-G and a few others when pricing a LED your best bet is lumens/watt, anything over about 80/watt (mid to lower binned XR-E good chinease LEDs) is pretty good for a fish tank.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •