ASA
Tue Oct 31, 2006, 07:25 AM
New Product: Now Available
Pentair AquaStep Ultraviolet Sterilizer
For use in the following applications: Installed in a hanging position or underneath aquarium tanks to kill disease causing micro-organisims. Also use inside pond filters or skimmers to kill free floating algae.
Features:
* Internal Step Design: Directs water back and forth across UV light tripling the contact time through the unit.
* Ease of Replacement: Unique 4 pin connector for easy bulb replacement without shutting down the system.
* Clear View Port: Allows visible light (no UV) to pass through and indicate bulb is operating.
* Adjustable Clamp: Spring loaded clamp creates a snug fit to any aquarium or reservoir tank. (for hang-on use).
* UV Bulb: Highest quality, pure hard quartz material allows maximum UV transmission and longer bulb life.
* Compression Coupling and Gasket: Creates water tight seal at quartz sleeve and around ballast cord.
* Electronic Ballast: 10W, 15W and 25W high output UL listed ballast. (extends the lifespan of the tube by up to 50%).
* Versatile: Inlet and outlet at top for hang on and at bottom for below aquarium installations. Use inlet ports on each side to connect multiple units together for any size requirement.
* Distribution Plate: Evenly distributes water into chamber.
* Plugs: Plug off inlet ports not in use. Can be removed to drain or clean unit.
* Design: Innovative design creates more volume area for increased contact time. Flat side allows snug fit to any aquarium or reservoir tank.
* High Capacity: More capacity than any other make of equal size or capacity due to shape of chamber and step design.
* Water Fall: Increases oxygen level by spreading out a thin sheet of gently falling water. (during hang-on use).
* Adjustment Screws: Keeps unit level when installed in hanging position on tank.
* Injection Molded Construction: Heavy duty, thick wall ABS injection molded parts. Built to last.
* Free Standing Base: Holds AquaStep in place for installations below or beside aquarium.
Specifications (all models)
Wattage: 10w
Bulb Length: 34cm
Recommended Flow Rate: 800-1200lph
Height: 485mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm
Wattage: 15w
Bulb Length: 39cm
Recommended Flow Rate: 1700lph
Height: 535mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm
Wattage: 15w
Bulb Length: 45cm
Recommended Flow Rate: 2800lph
Height: 585mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm
Pentair AquaStep Ultraviolet Sterilizer
For use in the following applications: Installed in a hanging position or underneath aquarium tanks to kill disease causing micro-organisims. Also use inside pond filters or skimmers to kill free floating algae.
Features:
* Internal Step Design: Directs water back and forth across UV light tripling the contact time through the unit.
* Ease of Replacement: Unique 4 pin connector for easy bulb replacement without shutting down the system.
* Clear View Port: Allows visible light (no UV) to pass through and indicate bulb is operating.
* Adjustable Clamp: Spring loaded clamp creates a snug fit to any aquarium or reservoir tank. (for hang-on use).
* UV Bulb: Highest quality, pure hard quartz material allows maximum UV transmission and longer bulb life.
* Compression Coupling and Gasket: Creates water tight seal at quartz sleeve and around ballast cord.
* Electronic Ballast: 10W, 15W and 25W high output UL listed ballast. (extends the lifespan of the tube by up to 50%).
* Versatile: Inlet and outlet at top for hang on and at bottom for below aquarium installations. Use inlet ports on each side to connect multiple units together for any size requirement.
* Distribution Plate: Evenly distributes water into chamber.
* Plugs: Plug off inlet ports not in use. Can be removed to drain or clean unit.
* Design: Innovative design creates more volume area for increased contact time. Flat side allows snug fit to any aquarium or reservoir tank.
* High Capacity: More capacity than any other make of equal size or capacity due to shape of chamber and step design.
* Water Fall: Increases oxygen level by spreading out a thin sheet of gently falling water. (during hang-on use).
* Adjustment Screws: Keeps unit level when installed in hanging position on tank.
* Injection Molded Construction: Heavy duty, thick wall ABS injection molded parts. Built to last.
* Free Standing Base: Holds AquaStep in place for installations below or beside aquarium.
Specifications (all models)
Wattage: 10w
Bulb Length: 34cm
Recommended Flow Rate: 800-1200lph
Height: 485mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm
Wattage: 15w
Bulb Length: 39cm
Recommended Flow Rate: 1700lph
Height: 535mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm
Wattage: 15w
Bulb Length: 45cm
Recommended Flow Rate: 2800lph
Height: 585mm
Width: 190mm
Depth: 80mm
Inlet: 19mm
Outlet: 19mm