brucen89
Wed Oct 11, 2006, 11:01 AM
I am going to be upgrading my tank soon and I need to sell my current 6fter.
Tank
6' x 2' x 2.5'
12 mm glass and at least 15mm base and lids
Part new glass and resealed by St George Aquarium in the last 6 months.
1 x 6' light
300 watt Stainless steel heater with remote temperature control outside the tan
Internal power head with filter
Cabinet and hood
Side doors to remove the sump filter
Solid stand
Outer in stained pine
Hood still original black
Sump filter 4'x 16" x 18" and lids
Extremely efficient filter, custom built for the tank. Specially design to have a pre-filter sponge first, before the water is diffused over the bio balls. The design allows the build of scum to be easily vacuumed up.
9600 l/h pump
Dual compartment for the 2 inlets in the tank
Over 1,000 bio balls
Two intakes
One outlet with spray bar
All piping
I am looking at $1000 for all this.
Tank 1:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1050_001.jpg
Right Side Weir:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1053_001.jpg
Tank shot 2:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1058_001.jpg
Under cabinet, sump:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1061_001.jpg
Heater control:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1063_001.jpg
Bruce
Tank
6' x 2' x 2.5'
12 mm glass and at least 15mm base and lids
Part new glass and resealed by St George Aquarium in the last 6 months.
1 x 6' light
300 watt Stainless steel heater with remote temperature control outside the tan
Internal power head with filter
Cabinet and hood
Side doors to remove the sump filter
Solid stand
Outer in stained pine
Hood still original black
Sump filter 4'x 16" x 18" and lids
Extremely efficient filter, custom built for the tank. Specially design to have a pre-filter sponge first, before the water is diffused over the bio balls. The design allows the build of scum to be easily vacuumed up.
9600 l/h pump
Dual compartment for the 2 inlets in the tank
Over 1,000 bio balls
Two intakes
One outlet with spray bar
All piping
I am looking at $1000 for all this.
Tank 1:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1050_001.jpg
Right Side Weir:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1053_001.jpg
Tank shot 2:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1058_001.jpg
Under cabinet, sump:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1061_001.jpg
Heater control:
http://i56.photobucket.com/albums/g191/brucen89/_MG_1063_001.jpg
Bruce