PDA

View Full Version : Filter Sand - Where to buy SPECIFICALLY!



Benny
Wed Oct 05, 2005, 12:15 PM
Hey guys i have some of the filter sand branded unicorn or somethin (see pic) however mine appears yellowy coloured not white as was expected...

Curious where in sydney can u source good quality filtersand, preferably in the north shore, or city area (dont mind eastern suburbs or inner west, but nothing too far away)

Benny

Proteus
Thu Oct 06, 2005, 11:03 AM
I know the local 'Swim-mart' pool shops stock the true quartz based filter sand.

http://www.discusforums.com/forum/files/dscn0002__small__184.jpg

DR.V
Thu Oct 06, 2005, 12:29 PM
Do you know how much Pro for that 20kg bag ??

Benny
Thu Oct 06, 2005, 12:30 PM
And are you talkin bout the one on botany st/rd near SLS?

Benny
Thu Oct 06, 2005, 12:43 PM
ugh i was lookin thru the yellow pages and seem to have found my answer... Though the mosman swimart place had the same "unicorn" branded stuff i already have anyhoo...


Go figure, gotta do the ring around it seems!

Proteus
Thu Oct 06, 2005, 09:33 PM
maybe its poolmart... I use the local one in Gymea.

If memory serves me correct approx $15 per 20kg

Benny
Fri Oct 07, 2005, 01:13 AM
This is driving me mad, i have rung at least 3 stores around sydney, and everyone uses the Cheetham salts unicorn filter sand!!!

I also noticed ro, urs is a different grade to mine... Mine is 16/30 urs is 16/40

Go figure..!!!!!
Im goin mad here!

oscar
Fri Oct 07, 2005, 08:06 PM
I recently (yesterday) purchased some Blue Circle "Specialised Sand". It's veru white in colour even without being wet and under lights.

I tell you what i'm wondering why an "inert" material needs the warnings about flushing skin if comming into contact etc.

Proteus
Fri Oct 07, 2005, 11:12 PM
I tell you what i'm wondering why an "inert" material needs the warnings about flushing skin if comming into contact etc.

Dust... being silica (quartz) based it is sharp and can do damage (i.e. in eyes etc)

oscar
Sat Oct 08, 2005, 11:03 AM
I also noticed ro, urs is a different grade to mine... Mine is 16/30 urs is 16/40


Benny,

This means that the upper limit for the particle size for Proteus' product is larger than yours. The lower limit for particle size is the same.

Proteus
Sat Oct 08, 2005, 11:32 AM
From the research I have done 16/40 to 16/50 is perhaps the best grade filter sand to get, due to the fact it doesnt compact like the finer grain sand does.

You want it to compact to an extent, but not to the point where aneorobic bacteria can build up and is trapped below the substrate surface.

fishingjedi
Sat Oct 15, 2005, 10:56 PM
maybe its poolmart... I use the local one in Gymea.


Benny, do yourself a favour & come on a drive down to "Gods Country" The Sutherland Shire for those of you that dont know the local term. The store Proteus is talking about is on President ave in Gymea. Damn easy to find, sticks out like a sore thumb on the left hand side of the road when your driving from Miranda to Gymea.

Good luck.

jho51e
Sun Jan 15, 2006, 06:42 AM
I just bought myself 2 bags of this sand from Swimart Nth Strathfield.

I opened it to find it is not white? It is more grey/brown? Is this right? I was expecting it to be white. :-(

jho51e
Sun Jan 15, 2006, 06:43 AM
I recently (yesterday) purchased some Blue Circle "Specialised Sand". It's veru white in colour even without being wet and under lights.

Oscar, where did you purchase your sand?

oscar
Mon Jan 16, 2006, 10:44 PM
I purchased mine from Clark Rubber/Pools

Proteus
Mon Jan 16, 2006, 10:48 PM
jho51e if need be I can get some just around the corner from me...

jho51e
Tue Jan 17, 2006, 12:24 AM
Thanks Proteus, I might drag my hubby for a drive to Gymea this weekend... :-)

Thanks Oscar, might ring Clark Rubber as well...

Proteus
Tue Jan 17, 2006, 12:27 AM
If you send me a PM of where you are I might be able to get some to you :wink: