keVerns
Wed Jul 27, 2005, 07:39 PM
Hi people,
i'm looking to re-do my tank...starting from complete scratch again. Going thru the proper procedures to obtain a mad ass planted tank.
Tank details and what i have currently:
3x2x2" tank
2x 3ft lighting (60watt in total)
co2 pressurized setup
ehiem 2213
temp: 27degrees
First of all which fert for substrate should i use.
Atm my thoughts are on either
JBL aquabasis or
Aqua Medic Terralit
what are your thoughts on either of these 2 products?
Secondly, what type of gravel setup should i use?
#1 -
bottom layer as clay
top layer with pool sand mixed in with jbl or aquamedic
#2 -
fine 2mm white gravel with jbl or aquamedic mixed in
any problems having the sand?
i am planning to grow plants such as javaferns/sword/glosso/riccia
Thirdly, lighting... i will be upgrading to put in another 2x 30watt globes... having 4x 30watt.. is this sufficient enough for my plants? Should i run any particular bulb setting.. my thought atm are 2x nec tri and 2x aqua-glo.
Co2 presurized setup i already have...running internal reactor inlined with filter outlet and d class tank.. should be enough to last 1.5 years.
Any other advices for a nice planted tank?
Kevin
forgot to mention... does anyone have any good links of different types of setups as well as step by step procedures?
another thing i forgot to ask is... is it ok to cut up one of those cheapo 4ft reflectors that you would find at hardware places into a 3ft? as 4ft uses 37-40watt globes and 3ft with 30watt... would it be dangerous or something? only thought of this as my dads factory had their lighting replaced and i kept a few just incase it was useful. trying to save a money rather than buying another reflector as well as the globes.
Main question is.. would the tube of a 30watt be able to use with a 37-40watt setup.
i'm looking to re-do my tank...starting from complete scratch again. Going thru the proper procedures to obtain a mad ass planted tank.
Tank details and what i have currently:
3x2x2" tank
2x 3ft lighting (60watt in total)
co2 pressurized setup
ehiem 2213
temp: 27degrees
First of all which fert for substrate should i use.
Atm my thoughts are on either
JBL aquabasis or
Aqua Medic Terralit
what are your thoughts on either of these 2 products?
Secondly, what type of gravel setup should i use?
#1 -
bottom layer as clay
top layer with pool sand mixed in with jbl or aquamedic
#2 -
fine 2mm white gravel with jbl or aquamedic mixed in
any problems having the sand?
i am planning to grow plants such as javaferns/sword/glosso/riccia
Thirdly, lighting... i will be upgrading to put in another 2x 30watt globes... having 4x 30watt.. is this sufficient enough for my plants? Should i run any particular bulb setting.. my thought atm are 2x nec tri and 2x aqua-glo.
Co2 presurized setup i already have...running internal reactor inlined with filter outlet and d class tank.. should be enough to last 1.5 years.
Any other advices for a nice planted tank?
Kevin
forgot to mention... does anyone have any good links of different types of setups as well as step by step procedures?
another thing i forgot to ask is... is it ok to cut up one of those cheapo 4ft reflectors that you would find at hardware places into a 3ft? as 4ft uses 37-40watt globes and 3ft with 30watt... would it be dangerous or something? only thought of this as my dads factory had their lighting replaced and i kept a few just incase it was useful. trying to save a money rather than buying another reflector as well as the globes.
Main question is.. would the tube of a 30watt be able to use with a 37-40watt setup.